Thermal Conductivity of Very Porous Kaolin-Based Ceramics

Abstract : A clay-based material exhibiting high pore volume fraction and low thermal conductivity suitable for thermal insulation is described. Starting with a commercial clay containing >75% kaolinite, foams were made by mixing in water and methyl cellulose as a surfactant then beating. After drying at 70°C, the pore volume fraction >94% remains almost constant for treatments up to 1150°C. In contrast, the phases constituting the solid skeleton evolve strongly with removal of surfactant, dehydroxylation of kaolinite, and formation of mullite. The latter leads to greater mechanical strength but also an increase in thermal conductivity. Thermal treatment of the kaolin foam at 1100°C yields a suitable compromise between low thermal conductivity of 0.054 W.(m.K) – 1 at room temperature with a compressive yield stress of 0.04 MPa. The radiation component in the effective thermal conductivity is <10% at 20°C increasing to >50% at 500°C
Type de document :
Article dans une revue
Domaine :
Liste complète des métadonnées

https://hal-unilim.archives-ouvertes.fr/hal-01115764
Contributeur : Fabrice Rossignol <>
Soumis le : mercredi 11 février 2015 - 17:09:21
Dernière modification le : mercredi 14 février 2018 - 16:02:09

Lien texte intégral

Identifiants

Citation

Julie Bourret, Aurélie Michot, Nicolas Tessier-Doyen, Benoît Nait-Ali, Fabienne Pennec, et al.. Thermal Conductivity of Very Porous Kaolin-Based Ceramics. Journal of the American Ceramic Society, Wiley, 2014, 97 (3), pp.938-944. ⟨10.1111/jace.12767⟩. ⟨hal-01115764⟩

Partager

Métriques

Consultations de la notice

194