Analytical methods to characterize heterogeneous raw material for thermal spray process: cored wire Inconel 625

T Lindner 1 S Bonebeau 2 R Drehmann 1 T Grund 1 Lech Pawlowski 2 T. Lampke 1
2 SPCTS-AXE2 - Axe 2 : procédés plasmas et lasers
SPCTS - Science des Procédés Céramiques et de Traitements de Surface
Abstract : In wire arc spraying, the raw material needs to exhibit sufficient formability and ductility in order to be processed. By using an electrically conductive, metallic sheath, it is also possible to handle non-conductive and/or brittle materials such as ceramics. In comparison to massive wire, a cored wire has a heterogeneous material distribution. Due to this fact and the complex thermodynamic processes during wire arc spraying, it is very difficult to predict the resulting chemical composition in the coating with sufficient accuracy. An Inconel 625 cored wire was used to investigate this issue. In a comparative study, the analytical results of the raw material were compared to arc sprayed coatings and droplets, which were remelted in an arc furnace under argon atmosphere. Energy-dispersive X-ray spectroscopy (EDX) and X-ray fluorescence (XRF) analysis were used to determine the chemical composition. The phase determination was performed by X-ray diffraction (XRD). The results were related to the manufacturer specifications and evaluated in respect to differences in the chemical composition. The comparison between the feedstock powder, the remelted droplets and the thermally sprayed coatings allows to evaluate the influence of the processing methods on the resulting chemical and phase composition.
Type de document :
Article dans une revue
Liste complète des métadonnées

Littérature citée [6 références]  Voir  Masquer  Télécharger

https://hal-unilim.archives-ouvertes.fr/hal-01875696
Contributeur : Beatrice Derory <>
Soumis le : mardi 18 septembre 2018 - 11:29:33
Dernière modification le : jeudi 27 septembre 2018 - 09:54:04
Document(s) archivé(s) le : mercredi 19 décembre 2018 - 13:47:14

Fichier

Lindner_2016_IOP_Conf._Ser.__M...
Fichiers éditeurs autorisés sur une archive ouverte

Identifiants

Collections

Citation

T Lindner, S Bonebeau, R Drehmann, T Grund, Lech Pawlowski, et al.. Analytical methods to characterize heterogeneous raw material for thermal spray process: cored wire Inconel 625. IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2016, 118, pp.012009. ⟨10.1088/1757-899X/118/1/012009⟩. ⟨hal-01875696⟩

Partager

Métriques

Consultations de la notice

61

Téléchargements de fichiers

122